out

Search

You can find the results of your search below.

Fulltext results:

DGPS-11 Beacon Receiver
3 Hits, Last modified:
to 31.2VDC| | Orange|RS-232C In| | White|RS-232C Out| | Black|- Negative| | Blue|TTL Out| | Green|Data Ground| | Brown|Shield Ground| How can I tell if... Look for a "D" in your Latitude/Longitude readout. ====== DGPS Beacon Receiver ====== I found an
MySensor board
2 Hits, Last modified:
sensors:mysensor_board.jpg?400|}} After reading about the [[http://mysensors.org/|MySensors project]], ... L><BR CLEAR="ALL"></HTML> ===== Components and layout ===== I'm using prebuilt modules for the Arduino ... nnections** * 1 x I2C * 2 x 1-wire * 2 breakout connectors for most of the remaining IO pins ^Qt
Panel Meter Interface
2 Hits, Last modified:
ovwf DAC,A movlw 0x00 movwf DAC+1,A CALL SPIclkout CALL Delay goto myloop ; ================= ; === Functions === ; ================= SPIclkout BCF PORTB,RB1 ; Clear CS (Active low) BCF POR
SD GPS Track Logger
2 Hits, Last modified:
unction^I/O^Pin^Description^ |SCK|O|RB1|SPI Clock Out| |SDI|I|RB0|SPI Data In| |SDO|O|RC7|SPI Data Out| |CD|I|RB4|Physical Card Insertion Detect Signal| |WD
X10 Interfacing
2 Hits, Last modified:
few years (on three units I've used) so I figured out the pinout. 4N35's are used internally for opto-isolation, The power is from a transformer internally,
7-segment display module
1 Hits, Last modified:
ount boards. I made this board using Eagle for layout and then I used [[http://www.batchpcb.com|BatchPC
Barometric Pressure sensor
1 Hits, Last modified:
nsor:max3221-max3243.pdf|}} ==== MAX233CPP Breakout board ==== ^Wire^Function^ |Red|5V| |Yellow|RX (D
IO Board
1 Hits, Last modified:
, rated for 5 to 240 Volts, AC or DC. ====== Pinout ====== ^Relay board^Signal Name^Pin^#^Pin^Signal
Relay board
1 Hits, Last modified:
s:electronics:relayboard:relay_board.pdf|Board layout}} <HTML><BR CLEAR="ALL"></HTML> ====== OptoR
Serial Converter
1 Hits, Last modified:
233CPP * Uses no external caps ===== Cable Pinout ===== ^Pin ^Wire Colour ^Description ^ |1 |N/C |
Temperature sensing devices
1 Hits, Last modified:
pins 7 & 8 {{:projects:electronics:adt7410_pinout.png?600|}} From [[http://www.analog.com/en/senso
Tire Pressure Sensor
1 Hits, Last modified:
heet to graph the transfer function, then working out the math to something which can be easily done in
USB Serial Adapter
1 Hits, Last modified:
|DTR| {{:projects:electronics:usbserial:pl2303pinout.gif?300|}} ==== Reference ==== * {{:projects:e
Tire Pressure Sensor Code @projects:electronics:tirepressuresensor
1 Hits, Last modified:
acros * ; ******************************* Bin_Out macro Floc ; Output a Binary Value variabl