Search

You can find the results of your search below.

Tire Pressure Sensor Code @projects:electronics:tirepressuresensor
12 Hits, Last modified:
Pressure sensor using an MPX5700DP sensor and LCD display ;# Version :1.0 ;# Revision Da... ne I2C_7SEG ; If Defined, use I2C to control display #DEFINE ADRC0 b'' #DEFINE ADRC1 b'' ; #d... XLCDCursorOnBlinkOn equ B'00001111' ;Display on Cursor on and Blink on XLCDCursorOnBlinKOff equ B'00001110' ;Display on Cursor on and Blink off XLCDDisplayOnCursorOff
Tire Pressure Sensor @projects:electronics
4 Hits, Last modified:
easy to interface to the PIC. Instead of the LCD display the finished project will use the [[7segdisplay]]... I have not been able to locate a small, backlight display, or even a small single line display that is inexpensive. ===== Prototype ===== {{:projects:electronics:t... {{:projects:electronics:p1020101.jpg?300|}}{{:projects:electronics:7segdisplay:display_working.jpg?300|}}
7-segment display module @projects:electronics
3 Hits, Last modified:
====== 7-segment display module ====== {{:projects:electronics:7segdisplay:display_working.jpg?400 |Working Display}} <note>**Arduino library available on [[https://github.com/Photonicsguy
405nm Laser Diode
1 Hits, Last modified:
ging other parts off of the board, especially the display and the TOSLINK connector. * Blu-Ray * [[ht
Laser speckle display
1 Hits, Last modified:
==== Laser speckle display ==== Using a glass tube to suspend a skittle or piece of plastic and illuminati
Lenovo T530 Laptop WiFi upgrade
1 Hits, Last modified:
sically, everything up to the trim, keyboard, and display. - I used the existing thermal compound for t
Optrex IM50240 Display @projects:electronics
1 Hits, Last modified:
====== Optrex IM50240 Display ====== Hitachi HD44100H Chipset {{:projects:electronics:hd44100r_datasheet.p
PicGPS Display @projects:electronics
1 Hits, Last modified:
==== PicGPS Display ==== One of my first PCB boards {{:projects:electronics:boardfinished.jpg|}}
X10 Interfacing @projects:electronics
1 Hits, Last modified:
===== X10 Mini Timer power supply ===== The LCD display seems to die after a few years (on three units I'
OpenSCAD @projects:3d:openscad
1 Hits, Last modified:
Endcap for a clear plexiglass tube to hold an LCD display module</WRAP> {{ :projects:3d:openscad:endcap.png